The basic purpose of the complex
1. Application in the cast film, breathable film and non-woven fabrics and other materials on the paste. Applicable to baby diapers, medical protective clothing, food desiccant bags and other industries products.
2. Application of non-woven materials such as rubber compound (paste) and cutting processing. Applicable to home air purifier, car air purifier, air conditioning, refrigerator and other matching filter processing.
Generally speaking, the Laminating Machine refers to a kind of compound equipment in home textile, garment, furniture, automobile interior and other related industries. It is mainly used for all kinds of fabrics, leather, film, paper and sponge. Process. It is divided into plastic composite and non-adhesive compound, there are plastic composite is divided into water glue, PU oil glue, hot melt adhesive, etc., non-adhesive composite process for direct bonding between the material or flame burning composite. At present, the complex national standard has been implemented.
1, carefully read the production orders, according to the requirements of the production requirements of the material and fill the list of materials, according to pick up a single warehouse manager to receive the appropriate specifications and the number of composite materials to confirm whether the printed film has been placed in the specified area.
2, check the composite material is qualified (check the corona, corona, thickness, width, the appearance of no crystal point, wrinkle), to confirm whether the need for rolling material and appearance quality (with the standard check whether there is color , Check the printing film is a knife line, ink points, missing printed, version of the injury, dry version and other undesirable phenomena).
3, according to product requirements to find the corresponding rubber pressure roller, and check whether there is a defect, according to the "composite process record card" technical information to receive the appropriate glue and put the appropriate specifications of the network roller.
4, auxiliary staff on the printing film and composite materials.
5, according to the specifications and proportion of glue with glue, ester sol full mixing for 15 minutes, water glue for 30 minutes.
6, according to the "composite process record card" process parameters set a good drying temperature, tension, pressure and other parameters.
7, open the machine water, electricity, gas, check whether there are leaks and other unusual circumstances, if any equipment abnormalities, timely repair.
1, open the machine to produce 500 meters cut or stop, carefully check the product quality: glue position, composite white point, composite bubble, composite wrinkles, membrane curl, product unit size and other common problems, according to the actual test situation Fill in the "first confirmation record form". Need to get ripening room ripening room for 30 minutes to see the composite effect.
2, the normal production process, often check the operation of the machine, temperature, pressure is normal, the plastic situation, the quality of composite materials, glue splash is blocked.
3, each volume of film cut, take about 1 meter of the sample, carefully check the product quality, with particular attention to the composite white point, bubble, wrinkle, size shrinkage, winding tension control, and asked the staff to do the process Of the inspection and the "process inspection report" records.
4, the production process of abnormal quality, after processing must be marked in time, and in the semi-finished product label to write what is clear, the number of meters, channel location, prompted after the process attention.
5, in the production process of abnormal quality, handling 500 meters or can not solve the problem, you must stop the feedback to the production department, by the production department to solve and make a decision. Do not allow concealment or self-assertion for production.
6, arrangements and supervision of the work of supporting the work of the state and the quality of work, especially the different structure and material thickness of the product curing temperature and time.
7, in accordance with the requirements of the company to fill out the production date, the data must be true, write the producer, date, time.
8, the maintenance of environmental sanitation inside and outside the machine, at any time to ensure that the material placed, loading trolley, glue bucket placed, pad, paper tube, office items on the table, the positioning of objects on the machine and so on.