Home > Exhibition > Content

In order to protect the twin screw extruder gear box the box must do the following

Jan 06, 2017

For the first time after 500 hours of use, change the oil once;

The extruder adopts the brand for the 150th original pressure gear oil for lubrication;

Normal operation oil level is not lower than marked centre line, please add below the centre line;

Oil every 3,000-hour after time;

oil change should clean the casing and oil filter, replace after clarified the use of lubricants, clean lubricant again into the box above the box once, then released, then mount the new lubricant;

Use regular monthly should be clean and lube oil filters, bedding-in period within a week to clean the oil filter. Cleaning method, locate the oil filter, turn it on, remove dirt;